Skip to main content
Find the miners to inspect or act on from the farm’s Miners page. Start from a built-in view, then add filters until the list shows only the miners you need. Every role can view and filter the miners in its assigned farms.

Start from a view

The tabs above the miner list are views: All Miners, Normal, Anomalies, Low Hashrate, and Stale. Each view applies a saved set of filters. For a miner in the Stale view, see A miner stopped updating.

Filter by anomaly type

  1. On the Miners page, click Filter. A menu lists the fields you can filter by.
  2. Select Anomaly Type. The anomaly types appear beside the menu, grouped as Hardware, Network, Operation, and Other.
  3. Select one or more types. The list shows miners with any selected type, and a filter chip appears above it.
Select the type that matches the miners you are looking for:

Filter by hashrate or temperature

  1. Click Filter and select Hashrate or Temperature. Fields for above and below appear.
  2. Enter a value in above, in below, or in both.
  3. Click Apply. The list shows the miners in that range.
Hashrate is in TH/s, and temperature is in °C. For miners hotter than 80°C, select Temperature and enter 80 in above.

Combine filters

To narrow the list further, add another filter. To change or remove a filter, click its chip. The Filter menu also filters by Labels, IP, Serial Number, Pool account, MAC, Worker Name, Miner Model, Firmware type, Mining Mode, and IP Mode. To filter without picking a field, type in the search box at the top of the menu:
  • For a filter by IP, type an IP address or an IP range.
  • For a search in Serial Number or Worker Name, type any other single word.
  • For filters built from a description, type a question or a sentence and select Ask AI.

See also